Stainless steel stuffing tubes

[petit couchon]

Hi all,
Could anyone tell me if the SS tubes from weschenfelder (link below) fit the hobby stuffer from the site shop.

http://www.weschenfelder.co.uk/butchers ... zzles.html

Thanks in advance.

[petit couchon]

Just answered my own question, I received the SS tubes in the post today and there exactly the same size as the plastic ones so if anyone is interested you can buy these with confidence for your hobby stuffer, nice quality as well, that's me stuffing this weekend.

[wheels]

Thanks for posting this. I've no doubt that it will help other people.

Phil

[TonyE]

Hi

I have been trying to source some stainless steel stuffing tubes for my hobby stuffer, I looked on the Weschenfelder site and enquired what the diameter of the flange was?? i.e. the wide bit at the end where it connects to the stuffer. Rob at Weschenfelder was very helpful and informed me that the flange was 50+ mm(cannot remember the exact size) Unfortunately my hobby stuffer requires a flange diameter of 38-40mm.
Petit - if you read this message, would you mind telling me what size of flange is on the S.S. tubes you bought, if they are 40mm I would like to buy some as well.

Thanks - T

[DanMcG]

38-40 mm is a common size for tubes in the States, for the small five pound stuffers.
https://www.sausagemaker.com/Set-of-3-S ... 8-1114.htm

I'm sure some supplier would ship overseas but it might be expensive

[TonyE]

You are right there Dan

I found what I needed on their Web site but shipping from the U.S. it doubles the cost of the item, shame really because they have a fantastic selection over there, much more so than in the U.K.

[petit couchon]

Hi

I have been trying to source some stainless steel stuffing tubes for my hobby stuffer, I looked on the Weschenfelder site and enquired what the diameter of the flange was?? i.e. the wide bit at the end where it connects to the stuffer. Rob at Weschenfelder was very helpful and informed me that the flange was 50+ mm(cannot remember the exact size) Unfortunately my hobby stuffer requires a flange diameter of 38-40mm.
Petit - if you read this message, would you mind telling me what size of flange is on the S.S. tubes you bought, if they are 40mm I would like to buy some as well.

Thanks - T

Sorry for the late reply, the flange is 53mm.
Hope this helps.