Well things as they may be I did find time within my somewhat hectic schedule to do some things on the side other than trying to get some sleep. It seems that the reaction of saying that one can over cook a ham (roast beef or lamb let alone chicken) seems imposable – in this instance ham is the one in question
Ruralidle and I discussed the pros and cons one night on fb and was given a complement to which I returned ‘I seem to have a knack (??) call it what you like but I tend to see things for what they are’. We disused the cooking of hams and to my comeback of hams being over cooked at
simmered it until internal temp was 69 deg
(which is 156 degrees F) the discussion went to
That's probably 'cos the FDA advice is 160F
from there to
The FDA recommendation is fine; nowt wrong wiv it --- BUT -- that is what it has to achieve to be safe As long as it is @ that temp for five minutes you are fine/safe -- You cook to internal of 160F -- five minutes later you are sitting @ 170F and climbing -- hence you now have an over cooked ham FDA/CFIA/FSA will tell you what to achieve but not how to achieve it -- remember I used to work that side
In 1991 I pulled the Gammon cure out of the UK to use in my shop, the last time I had done Gammon was in 65/66 while helping a friend out (Maisons Pork Butchers Abingdon Street Market) I did remember the cooking times as we went to the pub Sunday lunch time (3 hours) so like everyone else I put a temperature probe in and cooked to what I assumed was right – ‘pork – 160 degrees F’ ---- well it was pork – ham is when its cooked --- right?? --- ‘Not’
The ham was over cooked as well as on the dry side not to mention the weight loss
Upon checking the probe I noticed that hams was at 145 degrees F and knowing that we have to archive an internal temperature of 160 degrees F to fall within the food safe guidelines this is how I cook ‘all’ hams except 'hot smoked'
The following is the steps/procedure that I use.
Cooking the ham in a roasting pan uncovered with water. Please note the temperature and time to cook. 4 hours to cook, temperature set to 145 degrees F and internal is at 60 degrees F
Into the oven – note the timer/temperature 4 hours to cook, temperature set to 145 degrees F and internal is down to 59 degrees F
3 hours to go and the internal temperature is now up to 62 degrees F
Temperature on oven (gas) set to 300 degrees F
2 hours in and the internal temperature is now at 73 degrees F
25 minutes and 1 second to go and now we are sitting at 99 degrees F internal
+ 25 minutes and 24 seconds internal temperature is sitting at 117 degrees F
+ 1 hour 37 minutes and 4 seconds Internal temperature is now sitting at 140 degrees F
+ 1 hour and 54 minutes and 11 seconds internal temperature has got to 145 degrees F internal
Cooked
Had to change probe to make sure of the internal temperature Note the temperature is set for 160 degrees F internal probe is reading 149 degrees F and we are 2 minutes and 7 seconds into time
+ 39 minutes and 51 seconds in and we have archived 160 degrees F internal temperature which is needed
Just to show you what happens when you cook to 156 degrees F
+ 1 hour and 3 minutes and 49 seconds internal has reached 165 degrees internal
+ 1 hour and 45 minutes and 9 seconds internal is now at 169 degrees F
After the ham had cooled in the liquid it’s transferred to the tray
Hope that this has been of some hope to people